AmplifierDesigned specifically for automotive, military and aerospace BCI EMC testing, this mismatch tolerant Class A amplifier delivers power continuously into the varying match typically associated with this type of testing.
The Class A design ensures a high reliability, low distortion linear performance across the frequency range. This design also ensures that the amplifier will continue to operate at full power even when presented with an open or short circuit at its output.
The unit is powered from a switched mode power supply for high efficiency, high power factor and wide voltage range operation. The unit is air-cooled with integral fans, and is protected against faulty cooling by excess temperature sensing. A safety interlock connector is provided, which the user can short circuit to ground, to put the amplifi er into standby mode. Front panel indicators are provided to indicate over-temperature and rf interlock operation.
Highlights
Power Supply Phases: 1
Power Supply Voltage: 100-240 VAC
Harmonics at P1 Db: ±20 dBc
Gain: 51 dB
Rated output power: 110 W minimum
Frequency range (instantaneous): 10 kHz to 400 MHz
Output power at 1 dB gain compression: 80 W minimum (110 W typical below 100 MHz)
IEC/EN 61000-4-6
CISPR 24
EN 61000-6-1
EN 61000-6-2
IEC 60533
IEC 60601-1-2
IEC 61326
MIL STD 461
RTCA/DO 160
CISPR 24
EN 61000-6-1
EN 61000-6-2
IEC 60533
IEC 60601-1-2
IEC 61326
MIL STD 461
RTCA/DO 160