- Home
- Products
- EMTEST
- Oscillatory Waves Immunity Test
- OCS 500N6F Series
OCS 500N6Fseries - compact testers for fast/slow damped oscillatory waves and ringwave
EMTEST OCS 500N6F series includes the test capabilities for fast damped oscillatory waves at 3 MHz, 10 MHz and 30 MHz up to 4.4kV and is extendable for slow damped oscillatory waves at 100 kHz / 1 MHz up to 3.0 kV (as per EN/IEC 61000-4-18) and for ringwave up to 6 kV as per EN/IEC 61000-4-12.
Damped oscillatory waves are repetitive transients mainly occurring in power, control and signal cables installed in high voltage and medium voltage stations, divided into slow and fast damped oscillatory waves. The ringwave is a non-repetitive damped oscillatory transient occurring in low-voltage power, control and signal lines supplied by public and non-public networks. 。
Highlights
Fully automated single box test system
Single DUT port
Fast Damped Oscillatory Waves up to 4.4 kV
Slow Damped Oscillatory Waves up to 3 kV (option)
Ringwave up to 6 kV (option)
Built-in CDN, 1-phase or 3-phase up to 32 A
Front panel operation
USB and GPIB interfaces
Benefits
OCS 500N6F 系列的基本配置為符合 IEC 61000-4-18 標準,測試電壓可達 4.4 kV,振盪頻率分別是 3 MHz、10 MHz 和 30 MHz 的快速阻尼振盪波模擬器。OCS 500N6F 系列的不同型號分別內置了單相或三相耦合 / 去耦網路,每線額定電流為 16A 或 32A。
ANSI/IEEE C37.90
ANSI/IEEE C62.41
EN 61000-4-10
EN 61000-4-12
EN 61000-4-18
IEC 60255-22-1
IEC 61000-4-10
IEC 61000-4-12
IEC 61000-4-18
IEC 61000-6-5
IEC 61850-3
IEC 62052-11
ANSI/IEEE C62.41
EN 61000-4-10
EN 61000-4-12
EN 61000-4-18
IEC 60255-22-1
IEC 61000-4-10
IEC 61000-4-12
IEC 61000-4-18
IEC 61000-6-5
IEC 61850-3
IEC 62052-11