- Home
- Products
- EMTEST
- EMS Compact Generators
- Compact NX5
EMS Compact GeneratorsCompact NX5 - Compact Tester for EFT, Burst, Surge and PowerFail
The compact NX5 is the most versatile tester to address transient and power fail requirements for both international and commercial standards. Featuring an easy-to-use color touch screen, the NX5 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing and CE Marking. Its internal single-phase coupling/decoupling Network (CDN) can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 A per phase. EMTEST supplies a large range of accessories for various applications such as magnetic field tests and more.
Highlights
Smallest compact generator with 7" touch screen
Burst 5.5 kV, Surge 5.0 kV and Power Fail
Built-in single phase CDN 400 V/32 A
Manual front panel operation with setup pictures
Separate key for START/STOP operation with LED
Monitor outputs for peak voltage and current
Opto-Link and Ethernet for remote control
Control of external three-phase couplers
Module PowerFail as per IEC/EN 61000-4-8/-11/-29(DC)
Fail inputs
Benefits
All in one - All you need for your testsThe compact NX5 bspt series is a generator which includes everything necessary to perform fully compliant tests. With separate power mains supply inputs, it allows the utilization of different EUT supply voltages for maximum flexibility.
The NX5 can be operated manually from front touch screen or remotely via its built-in ethernet or optical interface. Failure inputs allow control of an ongoing test sequence based on the state of the EUT. Monitoring outputs (BNC) offer easy signal verification and measurements. For enhanced safety requirements, features like interlock and a warning lamp are available.
NX5 is the first generator that recognizes the connected EUT power configuration. Pre-programmed routines with common test standards allow maximum user convenience. Quick start test routines where parameters can be changed.
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-8
IEC 61000-4-9
IEC 61000-4-11
IEC 61000-4-29
EN 61000-6-1
EN 61000-6-2
ECE-R10
EN 300329
EN 300340
EN 300342-1
EN 300386 V1.3.2
EN 301489-1
EN 50121
EN 55024
IEC 60255-22-5
FCC 97-270 (part 68)
IEC 61326
IEC 61850-3
IEC 61000-4-5
IEC 61000-4-8
IEC 61000-4-9
IEC 61000-4-11
IEC 61000-4-29
EN 61000-6-1
EN 61000-6-2
ECE-R10
EN 300329
EN 300340
EN 300342-1
EN 300386 V1.3.2
EN 301489-1
EN 50121
EN 55024
IEC 60255-22-5
FCC 97-270 (part 68)
IEC 61326
IEC 61850-3