- Home
- Products
- EMTEST
- EMS Compact Generators
- EFT 500N5
EMS Compact GeneratorsEFT 500N5 series - EFT/Burst tester
The EFT 500N5 series are the state-of-the-art EFT/Burst testers with a built-in coupling/decoupling network for single phase or three-phase mains supply lines and a HV terminal to connect a capacitive coupling clamp.
The spike frequency can be varied from as low as 100Hz up to 1,000kHz. The EFT 500N5 is capable to generate 10,000 spikes per second or up to 1,000 spikes per burst.
Its performance fully complies with IEC 61000-4-4 Ed.3:2012. Pre-programmed standard test routines and numbers of selected user test routines make EFT 500N5 an optimum solution for both testing during development and final testing of products or sub-assemblies.
Highlights
10,000 pulses/sec.
4.8kV Burst voltage
Spike frequency up to 1MHz
Built-in 1ph or 3ph coupler up to 50A
Pulse verification acc. to IEC 61000-4-4 Ed.3 on each coupling path
Standard test routines
USB and GPIB interfaces
Software for Windows Vista & Windows 7
Benefits
EEFT 500N5 series - the Burst/EFT generators that go beyond specificationAdjustable wide ranges for spike frequency and burst duration. Of course, the EFT 500N5 meets the latest waveform requirements into50ohmload output as well as at the DUT port in common mode. The EFT 500N5 is the truly, fully compliant EFT/Burst tester.
Different models of EFT 500N5 series are available. It can be ordered with a built-in single phase or three-phase coupler for rated DUT currents up to 50A.
EFT 500N5 can also be integrated in a complete test system in combination with other generators of the EMTEST 500 series and operate via a common coupling/decoupling network being equipped with the corresponding control interface.
ANSI/IEEE C62.41
EN 61000-4-4
EN 61000-6-1
EN 61000-6-2
IEC 60601-1-2
IEC 61000-4-4
IEC 61326
IEC 61850-3
EN 61000-4-4
EN 61000-6-1
EN 61000-6-2
IEC 60601-1-2
IEC 61000-4-4
IEC 61326
IEC 61850-3