VCS 500N10T-EN/IEC 61000-4-5-EMTEST-穎立科技有限公司

Action Instrument Co., Ltd.

EMI-ISO 7637穎立科技有限公司

VCS 500N10T


VCS 500N10T

Combination Wave (Surge) and Telecom Surge Generator up to 10kV

  • Descriptions

    Combined combination wave / Telecom surge generator
    Surge pulses occur due to direct or indirect lightning strokes to an external (outdoor) circuit. This leads to currents or electromagnetic fields causing high voltage or current transients. Another source for surge pulses are switching transients originating from switching disturbances and systems faults.
    Due to this phenomenon, nearly every electrical and electronical device may suffer from such lightning events which justifies the necessity of surge tests being widely performed. Surge voltage can reach several thousands of volts and surge current is seen to reach several thousands of amps.
  • Highlights

    - Combination Wave up to 10kV/5kA
    - Telecom surge voltage up to 10kV
    - Telecom surge current up to 666A
    - Repetition rate 60s @10kV Surge
    - Built-in coupling for telecom port testing
    - USB (optical link) and GPIB interface
    - Interlock
    - Warning lamp control
    - Manual operation
    - Voltage/current monitors
  • Benefits

    VCS 500N10T - Compact surge / Telecom surge generator with built-in coupling for telecom ports
    EMTEST VCS 500N10T unifies the combination wave surge and telecom surge testing in one unit up to 10kV. Moreover, it offers built-in coupling resistors for telecom port testing.
    For combination wave surge tests on high-current mains supply lines its capability can be extended by an external CDN to achieve nominal currents of 100A and more per phase.
    By selecting the desired coupling, the source impedance and the coupling capacitor is set automatically whatever CDN is connected.
    Fail inputs are offered as standard for DUT monitoring purposes. Peak values of voltage and current are shown in the display and these values are transferred to the software for reporting.
    To comply with safety regulations the VCS 500N10T is equipped with a contact to control warning lamps and with a safety interlock.
    Pre-programmed Standard test routines allow highest user convenience. Still the VCS 500N10T offers the quick start test routine where parameters can be changed on-line during the test to evaluate the susceptibility level of an individual DUT.

  • Applications


    EN 300386 V1.3.2
    EN 61000-4-5
    EN 61000-4-9
    IEC 60255-22-5
    IEC 61000-4-5
    IEC 61000-4-9
    IEC 61326
    IEC 61850-3
  • Action Instrument Co., Ltd.
  • 11F.-2, No. 2, Boai 4th Rd., Zuoying Dist., Kaohsiung City 81369, Taiwan
  • Tel :07-3501899
  • Fax :07-3488599
  • E-mail
  • Line ID:@352uxium

2020© Copyright All Rights Reserved

Web Design : Apple Web Seo