CNI 503X series-EN/IEC 61000-4-4-EMTEST-穎立科技有限公司

Action Instrument Co., Ltd.

EMI-ISO 7637穎立科技有限公司

CNI 503X series

                                                      

CNI 503X series

3-phase coupling/decoupling networks for Burst and Surge testing up to 10Kv

 
  • Descriptions

    3-phase coupling/decoupling networks for EFT, Burst, Surge
    The three-phase coupling/decoupling networks of the CNI 503x series are used to couple EFT, Burst and Surge pulses on DC-lines or to three-phase (4-wire or 5-wire supply lines) mains supply systems for voltages up to 1,000VDC / 3x690VAC.
    This includes more and more common testing of inverters used in the area of renewable energies (e.g. photovoltaic systems, wind power stations, electric cars).
    Within the range of EMTEST coupling/decoupling networks, we offer different models for test voltages from 5kV up to 10kV with DUT currents of 16A, 32A, 63A and 100A (higher current ratings on request) for various test requirements and equipment configuration.
  • Highlights

    - Combined coupler for EFT, Burst and Surge test
    - Surge as per ANSI/IEEE C62.41 (models CNI 503Bx only, other couplers on request)
    - LEDs indicate active mode and coupling
    - Automatic selection of Surge impedance
    - Fully remote controlled by EMTEST generators
    - Meet requirements for 3x690VAC and 1,000VDC
  • Benefits

    The CNI 503x-series coupling/decoupling networks are built fully complied to the standard of EN/IEC 61000-4-4 and EN/IEC 61000-4-5. Both residual voltage levels and inducted value of decoupling are carefully considered in order to meet the requirements of voltage drop at the rated current of each type of CDN. Besides EN/IEC 61000-4-5 standard, the CNI 503Bx series are also fully complied with the surge test requirements outlined in ANSI/IEEE C62.41.
    Coupling values of CNI 503x-series are set automatically by controlled generator and selected test (either by manual operation or via software). When performing surge tests, the generators will automatically set the required source impedance depending on the standard and the coupling mode.
    For DC EUT-supply, CNI 503 coupling networks offer an optional TEST ON function with a contactor up to 1,500 VDC / >100 A is available.







     
  • Applications

    我是中標題

    EN 61000-4-12
    EN 61000-4-4
    EN 61000-4-5
    EN 61000-6-1
    EN 61000-6-2
    EN 61543
    IEC 60601-1-2
    IEC 61000-4-12
    IEC 61000-4-4
    IEC 61000-4-5
    IEC 61008-1
    IEC 61009-1
    IEC 61326
    IEC 61850-3
  • Action Instrument Co., Ltd.
  • 11F.-2, No. 2, Boai 4th Rd., Zuoying Dist., Kaohsiung City 81369, Taiwan
  • Tel :07-3501899
  • Fax :07-3488599
  • E-mail :bill@atti-tw.com
  • Line ID:@352uxium

2020© Copyright All Rights Reserved

Web Design : Apple Web Seo
穎立科技專為您規劃適合貴司專案相對應的測量儀器,與EMTEST大廠合作,穎立科技所代理的EMTEST為知名的電磁相容測試設備大廠,包括快速瞬變發生器、靜電放電模擬器、雷擊產生器、波形模擬器和車用突波測試設備,躋身於IEC(國際電工委員會)、通訊、車用電子、醫療和電子元器件測試領域的領導者行列