DITO – the ultimate ESD tester
Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent disturbances or even destruction to sensitive electronics or controls. Voltages of several 1,000 volts are generated.
DITO is the most advanced ESD tester to simulate ESD pulses as per EN/IEC 61000-4-2 and other standards requirements.
- Most ergonomic design
- Light weight (870g)
- Interchangeable discharge tips
- Interchangeable R/C networks
- Library of standard test routines
- Test voltage measurement and control
- Various test routines for testing and evaluation
- High-sophisticated user guidance by test plans created by esd.control software
- Optional fiber optic link between DITO and computer (USB port)
DITO – the most versatile ESD tester
DITO is best designed for the different requirements for testing ESD. Its powerful battery allows to generate more than 50,000 pulses at 16.5kV. This is enough for more than a full day's job. Its menu leads user through standard tests, helps to evaluate the test points and allows to find susceptibility levels.
Unlike any other ESD generators, its ergonomic design is recognized to be more user-friendly. There is no hiding part of discharge tip while watching the display or operating DITO. You will be able to see the tip point no matter how you operate DITO the DUT.
The discharge voltage is measured and recorded. Discharge is stopped automatically when low battery voltage. The user is informed when DITO cannot charge properly. All this helps to assure reliable and reproducible tests without any doubt.
Discharge tips and discharge networks can easily be changed without disassembling the DITO; simply remove and plug-on another tip or module. The discharge modules are automatically recognized, and the R/C configuration is shown on the display.
EN 300386 V1.3.2