-
Descriptions
LD 200N - Compact high-energy Load Dump generator
Load Dump pulses simulate a sudden battery disconnection (e.g. by corrosion) from the alternator. The lost of the battery load causes the alternator generates an overvoltage impulse. Such Load Dump pulses are having high energy pulses with a high potential of destruction. EMTEST LD 200N simulates these high energy pulses with duration of hundreds of milliseconds.
EMTEST LD 200N generates the Load Dump pulses as per ISO 7637, ISO 16750-2, SAE J1113, SAE J1455, JASO and many manufacturer specifications, e.g. Ford, Chrysler, Renault, PSA, NISSAN etc. By means of a built-in clipping circuit, LD 200N also generates clipped load dump pulses as per international standards and manufacturer requirements. -
Highlights
- Compliant to ISO 7637, ISO 16750-2, SAE J1113, SAE J1455, JASO, Nissan and most car manufacturer requirements
- Generates Clipped Load Dump pulses
- Built-in 0.5 - 38 Ohm source impedance, selectable in 0.1 Ohm steps
- Pulse duration up to 1,200ms
- Built-in coupler 60V/30A, extendable to 200A
- Front panel operation
- Freestyle mode
- USB and GPIB interfaces -
Benefits
EMTEST LD 200N includes everything necessary to execute fully compliant load dump tests. It generates the required high-energy pulses as required by ISO 7637 and many other international and car manufacturer requirements, pulses in by capacitor and coupling network. The decay of the waveform follows ISO 7637-2:2004.
LD 200N is a tester including a 60V/30A DC coupling/decoupling network but still can be easily integrated into a complete test set-up.
Pre-programmed standard test routines allow highest user convenience. The FreeStyle mode allows user to easily generate individual Load Dump pulses setting time parameters and peak voltage as required.
The built-in CLD module enables the LD 200N to generate clipped load dump pulses as per various test requirements by setting time parameters and clipping levels as needed.
-
Applications
我是中標題
EN 300329
EN 300340
EN 300342-1
EN 301489-1
EN 301489-17
ISO 14982
ISO 16750-2
ISO 7637-1:1990
ISO 7637-2:1990
ISO 7637-2:2004
ISO 7637-2:2011
Iveco 16-2103 Rev.15 (2010)
EMC-CS-2010JLR V1.1 (2011-01)
- Home
- Applications
- ISO 16750
- LD 200N